Sensor Products
Optical Fingerprint Module
Capacitive Fingerprint Scanner
Capacitive Fingerprint Sensor
Contactless Infrared Button
Display Module
Reed Magnetic Sensor
Wireless Products
GPS module with antenna
GPS Module (PoT)
GPS Engine Board
GPS Module
GSM Module with SIM Holder
3.5G Module with SIM holder
4G Module with SIM holder
RF Connector + coaxial Cable
RF Connectors
Antennas
Industrial Products
Fingerprint / Biometric Padlock
HDMI1.4a AHC/2.0Hybrid AOC
GPS tracker
Industrial Sensors
Inquire
GPT3-MINI
Feature
* The GPS is integrated inside the 3G Module.

GNSS engine (GPS and GLONASS) with A-GPS (Offline and Online).

* High speed 3G modem.

* Save and Auto Resend up to 16384 locations

* Built in motion switch (activated by G-Force) and collision detector

* 3 negative outputs (200mA max per output)

* 4 negative or positive inputs (active low or active high to activate input).

(Inputs can be configured for multiple functions)

* 2 Analogue inputs with 1 Analogue input from 0 to +3.3 Volt – MAX with 10 Bit resolution and 1 Analogue input from 0 to +18Volt-MAX with 10 Bit resolution.

* 2 Digital (0-+3.3Volt-MAX) inputs or outputs.

* External +3.3Volt DC or +5Volt DC output power.

* 3 * Serial RS232 port (2 * 9600 baud Rate and 1* High speed 115200) for external communication, firmware upgrade or direct access to GSM. Suitable for Internet connection or data download or upload (FTP download and upload is available).

* Detects external power loss (Measures external power voltage).

* I-BUTTON, RFID (Mifare), Magnetic Card Reader, TPMS, CAN Bus, Blue tooth Display, GPS speed display, MDAS Advanced Driver Assistance System connection, Fuel measurement (2*) system and many more.

* Up to 3 Digital temperature reader connection option (simple 2 or 3 wire connection).

* Build in Voice/ Speech converter for full Voice commands for any input or output activations.

* GSM modem Voice I/O connector for Voice calls.

* GPS antenna detection for short circuit or not connected reporting

* GSM antenna detection for short circuit or not connected reporting

* Build in backup battery.

* Pulse counter or RPM counter input

* Direct serial RS232 (9600 baud Rate) GPS data output port for Navigation purpose.

* Operating temperature range -40 deg. C to +85 deg. C (Battery 0 – 60 deg. C)
Downloads